[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007faa0000 (usable) [ 0.000000] BIOS-e820: 000000007faa0000 - 000000007fb74000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fb74000 - 000000007fc00000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fc00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a PAE enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fec60 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0 [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 7FBB31C0, 00EC (r1 APPLE Apple00 7F 1000013) [ 0.000000] ACPI: ECDT 7FBB1000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: FACP 7FBAF000, 00F4 (r4 APPLE Apple00 7F Loki 5F) [ 0.000000] ACPI: DSDT 7FBA6000, 480E (r1 APPLE Apple00 20001 Loki 5F) [ 0.000000] ACPI: FACS 7FAA3000, 0040 [ 0.000000] ACPI: HPET 7FBAE000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 7FBAC000, 00BC (r2 APPLE Apple00 0 Loki 5F) [ 0.000000] ACPI: MCFG 7FBAB000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 7FBA5000, 008E (r1 PmRef Cpu0Cst 3001 INTL 20050309) [ 0.000000] ACPI: SSDT 7FBA4000, 0030 (r1 PmRef Cpu0Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FBA3000, 0047 (r1 PmRef Cpu1Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FBA2000, 0030 (r1 PmRef Cpu1Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FBA1000, 0047 (r1 PmRef Cpu2Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FBA0000, 0030 (r1 PmRef Cpu2Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB9F000, 0047 (r1 PmRef Cpu3Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB9E000, 0030 (r1 PmRef Cpu3Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB9D000, 0047 (r1 PmRef Cpu4Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB9C000, 0030 (r1 PmRef Cpu4Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB9B000, 0047 (r1 PmRef Cpu5Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB9A000, 0030 (r1 PmRef Cpu5Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB99000, 0047 (r1 PmRef Cpu6Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB98000, 0030 (r1 PmRef Cpu6Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB97000, 0047 (r1 PmRef Cpu7Cst 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB96000, 0030 (r1 PmRef Cpu7Ist 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB95000, 0CEC (r1 PmRef CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB8F000, 057B (r1 PCIRef Pci16118 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB94000, 0892 (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FB93000, 05F4 (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] Processor #4 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] Processor #6 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] Processor #7 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] Processor #5 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] Processor #3 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] enabled) [ 0.000000] Processor #2 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fe00000) [ 0.000000] Built 1 zonelists. Total pages: 1040384 [ 0.000000] Kernel command line: root=UUID=64070a17-ef1e-43fc-befe-63ecefdd5144 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2992.732 MHz processor. [ 46.620484] Console: colour VGA+ 80x25 [ 46.620745] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 46.620964] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 46.731210] Memory: 2045232k/4194304k available (2015k kernel code, 45104k reserved, 916k data, 364k init, 1174144k highmem) [ 46.731215] virtual kernel memory layout: [ 46.731216] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 46.731217] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 46.731217] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 46.731218] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 46.731219] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 46.731219] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 46.731220] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 46.731222] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 46.731245] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 [ 46.731331] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 46.731334] hpet0: 3 64-bit timers, 14318180 Hz [ 46.812301] Calibrating delay using timer specific routine.. 5989.05 BogoMIPS (lpj=11978111) [ 46.812318] Security Framework v1.0.0 initialized [ 46.812323] SELinux: Disabled at boot. [ 46.812332] Mount-cache hash table entries: 512 [ 46.814815] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 46.814821] monitor/mwait feature present. [ 46.814822] using mwait in idle threads. [ 46.814825] CPU: L1 I cache: 32K, L1 D cache: 32K [ 46.814826] CPU: L2 cache: 4096K [ 46.814828] CPU: Physical Processor ID: 0 [ 46.814829] CPU: Processor Core ID: 0 [ 46.814830] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 46.814836] Compat vDSO mapped to ffffe000. [ 46.814845] Checking 'hlt' instruction... OK. [ 46.828421] SMP alternatives: switching to UP code [ 46.828870] Early unpacking initramfs... done [ 47.021744] ACPI: Core revision 20070126 [ 47.021775] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 47.025089] CPU0: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.025101] SMP alternatives: switching to SMP code [ 47.025212] Booting processor 1/1 eip 3000 [ 47.035454] Initializing CPU#1 [ 47.112130] Calibrating delay using timer specific routine.. 5985.01 BogoMIPS (lpj=11970022) [ 47.112135] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.112138] monitor/mwait feature present. [ 47.112140] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.112141] CPU: L2 cache: 4096K [ 47.112143] CPU: Physical Processor ID: 0 [ 47.112144] CPU: Processor Core ID: 1 [ 47.112145] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.112665] CPU1: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.112682] SMP alternatives: switching to SMP code [ 47.112803] Booting processor 2/2 eip 3000 [ 47.123004] Initializing CPU#2 [ 47.200080] Calibrating delay using timer specific routine.. 5985.03 BogoMIPS (lpj=11970068) [ 47.200085] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.200088] monitor/mwait feature present. [ 47.200091] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.200092] CPU: L2 cache: 4096K [ 47.200093] CPU: Physical Processor ID: 0 [ 47.200094] CPU: Processor Core ID: 2 [ 47.200095] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.200658] CPU2: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.200666] SMP alternatives: switching to SMP code [ 47.200678] Booting processor 3/3 eip 3000 [ 47.210878] Initializing CPU#3 [ 47.288031] Calibrating delay using timer specific routine.. 5985.04 BogoMIPS (lpj=11970093) [ 47.288036] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.288039] monitor/mwait feature present. [ 47.288041] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.288042] CPU: L2 cache: 4096K [ 47.288044] CPU: Physical Processor ID: 0 [ 47.288045] CPU: Processor Core ID: 3 [ 47.288046] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.288628] CPU3: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.288636] SMP alternatives: switching to SMP code [ 47.288648] Booting processor 4/4 eip 3000 [ 47.298848] Initializing CPU#4 [ 47.375981] Calibrating delay using timer specific routine.. 5985.06 BogoMIPS (lpj=11970135) [ 47.375986] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.375989] monitor/mwait feature present. [ 47.375992] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.375993] CPU: L2 cache: 4096K [ 47.375994] CPU: Physical Processor ID: 1 [ 47.375995] CPU: Processor Core ID: 0 [ 47.375996] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.376597] CPU4: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.376606] SMP alternatives: switching to SMP code [ 47.376617] Booting processor 5/5 eip 3000 [ 47.386817] Initializing CPU#5 [ 47.463931] Calibrating delay using timer specific routine.. 5985.05 BogoMIPS (lpj=11970118) [ 47.463936] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.463939] monitor/mwait feature present. [ 47.463942] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.463943] CPU: L2 cache: 4096K [ 47.463944] CPU: Physical Processor ID: 1 [ 47.463945] CPU: Processor Core ID: 1 [ 47.463946] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.464474] CPU5: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.464483] SMP alternatives: switching to SMP code [ 47.464494] Booting processor 6/6 eip 3000 [ 47.474694] Initializing CPU#6 [ 47.551882] Calibrating delay using timer specific routine.. 5985.07 BogoMIPS (lpj=11970144) [ 47.551887] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.551890] monitor/mwait feature present. [ 47.551892] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.551893] CPU: L2 cache: 4096K [ 47.551895] CPU: Physical Processor ID: 1 [ 47.551896] CPU: Processor Core ID: 2 [ 47.551897] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.552443] CPU6: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.552451] SMP alternatives: switching to SMP code [ 47.552462] Booting processor 7/7 eip 3000 [ 47.562662] Initializing CPU#7 [ 47.639832] Calibrating delay using timer specific routine.. 5985.07 BogoMIPS (lpj=11970150) [ 47.639837] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 [ 47.639840] monitor/mwait feature present. [ 47.639842] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.639843] CPU: L2 cache: 4096K [ 47.639845] CPU: Physical Processor ID: 1 [ 47.639846] CPU: Processor Core ID: 3 [ 47.639847] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e3bd 00000000 00000001 [ 47.640411] CPU7: Intel(R) Xeon(R) CPU X5365 @ 3.00GHz stepping 07 [ 47.640420] Total of 8 processors activated (47884.42 BogoMIPS). [ 47.640561] ENABLING IO-APIC IRQs [ 47.640733] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 47.787811] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 47.807828] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 47.827870] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 47.847926] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 47.867950] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 47.887981] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 47.908016] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 47.928020] Brought up 8 CPUs [ 48.609132] migration_cost=83,9675 [ 48.609356] Booting paravirtualized kernel on bare hardware [ 48.609439] Time: 22:49:39 Date: 09/20/107 [ 48.609454] NET: Registered protocol family 16 [ 48.609537] EISA bus registered [ 48.609541] ACPI: bus type pci registered [ 48.611294] PCI: Using configuration type 1 [ 48.611295] Setting up standard PCI resources [ 48.618367] ACPI: EC: Found ECDT [ 50.125211] ACPI: System BIOS is requesting _OSI(Linux) [ 50.125213] ACPI: Please test with "acpi_osi=!Linux" [ 50.125214] Please send dmidecode to linux-acpi@vger.kernel.org [ 50.225214] ACPI: Interpreter enabled [ 50.225216] ACPI: (supports S0 S1 S3 S4 S5) [ 50.225233] ACPI: Using IOAPIC for interrupt routing [ 50.228096] ACPI: EC: GPE=0x11, ports=0x66, 0x62 [ 50.228132] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 50.228141] PCI: Probing PCI hardware (bus 00) [ 50.228210] PCI: 0000:00:03.0: class 600 doesn't match header type 01. Ignoring class. [ 50.228276] PCI: 0000:00:05.0: class 600 doesn't match header type 01. Ignoring class. [ 50.228328] PCI: 0000:00:06.0: class 600 doesn't match header type 01. Ignoring class. [ 50.228379] PCI: 0000:00:07.0: class 600 doesn't match header type 01. Ignoring class. [ 50.230210] PCI: Transparent bridge - 0000:00:1e.0 [ 50.230302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 50.230554] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 50.230620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] [ 50.230735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2.P2P5._PRT] [ 50.230805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2.P2P3._PRT] [ 50.230875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 50.230948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 50.231023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NRP4._PRT] [ 50.231089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SRP1._PRT] [ 50.231155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SRP3._PRT] [ 50.234023] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 9 10 *11) [ 50.234083] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 9 10 11) *3 [ 50.234142] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 9 *10 11) [ 50.234201] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11) [ 50.234259] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 9 10 11) [ 50.234317] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 9 10 *11) [ 50.234375] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 9 10 11) *0, disabled. [ 50.234433] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 9 *10 11) [ 50.234505] Linux Plug and Play Support v0.97 (c) Adam Belay [ 50.234511] pnp: PnP ACPI init [ 50.234515] ACPI: bus type pnp registered [ 50.235454] pnp: PnP ACPI: found 10 devices [ 50.235455] ACPI: ACPI bus type pnp unregistered [ 50.235458] PnPBIOS: Disabled by ACPI PNP [ 50.235485] PCI: Using ACPI for IRQ routing [ 50.235487] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 50.235573] NET: Registered protocol family 8 [ 50.235574] NET: Registered protocol family 20 [ 50.235609] pnp: 00:01: iomem range 0xd0000000-0xdfffffff has been reserved [ 50.235611] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 50.235613] pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 50.235615] pnp: 00:01: iomem range 0xfec00000-0xfecfffff has been reserved [ 50.236963] Time: tsc clocksource has been installed. [ 50.236980] Switched to high resolution mode on CPU 0 [ 50.237028] Switched to high resolution mode on CPU 1 [ 50.238324] Switched to high resolution mode on CPU 4 [ 50.238351] Switched to high resolution mode on CPU 5 [ 50.238374] Switched to high resolution mode on CPU 6 [ 50.238412] Switched to high resolution mode on CPU 7 [ 50.240882] Switched to high resolution mode on CPU 2 [ 50.240948] Switched to high resolution mode on CPU 3 [ 50.265806] PCI: Bridge: 0000:02:00.0 [ 50.265807] IO window: disabled. [ 50.265810] MEM window: disabled. [ 50.265813] PREFETCH window: disabled. [ 50.265816] PCI: Bridge: 0000:02:01.0 [ 50.265817] IO window: disabled. [ 50.265820] MEM window: disabled. [ 50.265822] PREFETCH window: disabled. [ 50.265825] PCI: Bridge: 0000:02:02.0 [ 50.265827] IO window: 2000-2fff [ 50.265831] MEM window: f2400000-f2cfffff [ 50.265833] PREFETCH window: disabled. [ 50.265836] PCI: Bridge: 0000:01:00.0 [ 50.265838] IO window: 2000-2fff [ 50.265841] MEM window: f2400000-f2cfffff [ 50.265843] PREFETCH window: disabled. [ 50.265846] PCI: Bridge: 0000:01:00.3 [ 50.265847] IO window: disabled. [ 50.265850] MEM window: disabled. [ 50.265852] PREFETCH window: disabled. [ 50.265855] PCI: Bridge: 0000:00:02.0 [ 50.265856] IO window: 2000-2fff [ 50.265859] MEM window: f2400000-f2dfffff [ 50.265861] PREFETCH window: disabled. [ 50.265863] PCI: not setting up bridge 0000:00:03.0 for bus 7 [ 50.265864] PCI: Bridge: 0000:00:04.0 [ 50.265866] IO window: 1000-1fff [ 50.265868] MEM window: f0000000-f20fffff [ 50.265870] PREFETCH window: e0000000-efffffff [ 50.265873] PCI: not setting up bridge 0000:00:05.0 for bus 9 [ 50.265874] PCI: not setting up bridge 0000:00:06.0 for bus 10 [ 50.265875] PCI: not setting up bridge 0000:00:07.0 for bus 11 [ 50.265876] PCI: Bridge: 0000:00:1c.0 [ 50.265877] IO window: disabled. [ 50.265880] MEM window: disabled. [ 50.265882] PREFETCH window: disabled. [ 50.265886] PCI: Bridge: 0000:00:1c.1 [ 50.265886] IO window: disabled. [ 50.265889] MEM window: disabled. [ 50.265892] PREFETCH window: disabled. [ 50.265895] PCI: Bridge: 0000:00:1c.2 [ 50.265896] IO window: disabled. [ 50.265899] MEM window: disabled. [ 50.265901] PREFETCH window: disabled. [ 50.265904] PCI: Bridge: 0000:00:1c.3 [ 50.265905] IO window: disabled. [ 50.265908] MEM window: disabled. [ 50.265910] PREFETCH window: disabled. [ 50.265913] PCI: Bridge: 0000:00:1e.0 [ 50.265914] IO window: disabled. [ 50.265918] MEM window: f2e00000-f2efffff [ 50.265920] PREFETCH window: disabled. [ 50.265931] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.265934] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 50.265943] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.265946] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 50.265956] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.265960] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 50.265971] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 50.265974] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 50.265985] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 50.265988] PCI: Setting latency timer of device 0000:02:02.0 to 64 [ 50.265998] PCI: Setting latency timer of device 0000:01:00.3 to 64 [ 50.266004] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 50.266010] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.266012] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 50.266019] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 50.266025] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 50.266031] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 50.266043] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 50.266046] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 50.266059] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 50.266062] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 50.266074] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 50.266077] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 50.266090] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 50.266094] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 50.266101] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 50.266107] NET: Registered protocol family 2 [ 50.316782] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 50.316835] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 50.317391] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 50.317568] TCP: Hash tables configured (established 131072 bind 65536) [ 50.317569] TCP reno registered [ 50.332883] checking if image is initramfs... it is [ 50.711553] Freeing initrd memory: 7332k freed [ 50.713036] audit: initializing netlink socket (disabled) [ 50.713049] audit(1192920580.276:1): initialized [ 50.713154] highmem bounce pool size: 64 pages [ 50.715321] VFS: Disk quotas dquot_6.5.1 [ 50.715383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 50.715469] io scheduler noop registered [ 50.715471] io scheduler anticipatory registered [ 50.715472] io scheduler deadline registered [ 50.715484] io scheduler cfq registered (default) [ 50.715614] Boot video device is 0000:08:00.0 [ 50.715699] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 50.715727] assign_interrupt_mode Found MSI capability [ 50.715730] Allocate Port Service[0000:00:02.0:pcie00] [ 50.715802] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 50.715830] assign_interrupt_mode Found MSI capability [ 50.715832] Allocate Port Service[0000:00:04.0:pcie00] [ 50.715908] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 50.715944] assign_interrupt_mode Found MSI capability [ 50.715946] Allocate Port Service[0000:00:1c.0:pcie00] [ 50.715978] Allocate Port Service[0000:00:1c.0:pcie02] [ 50.716061] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 50.716092] assign_interrupt_mode Found MSI capability [ 50.716093] Allocate Port Service[0000:00:1c.1:pcie00] [ 50.716131] Allocate Port Service[0000:00:1c.1:pcie02] [ 50.716208] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 50.716244] assign_interrupt_mode Found MSI capability [ 50.716246] Allocate Port Service[0000:00:1c.2:pcie00] [ 50.716277] Allocate Port Service[0000:00:1c.2:pcie02] [ 50.716361] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 50.716397] assign_interrupt_mode Found MSI capability [ 50.716399] Allocate Port Service[0000:00:1c.3:pcie00] [ 50.716431] Allocate Port Service[0000:00:1c.3:pcie02] [ 50.716515] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 50.716547] Allocate Port Service[0000:01:00.0:pcie10] [ 50.716626] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 50.716664] assign_interrupt_mode Found MSI capability [ 50.716666] Allocate Port Service[0000:02:00.0:pcie20] [ 50.716741] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 50.716774] assign_interrupt_mode Found MSI capability [ 50.716776] Allocate Port Service[0000:02:01.0:pcie20] [ 50.716827] Allocate Port Service[0000:02:01.0:pcie22] [ 50.716902] PCI: Setting latency timer of device 0000:02:02.0 to 64 [ 50.716934] assign_interrupt_mode Found MSI capability [ 50.716936] Allocate Port Service[0000:02:02.0:pcie20] [ 50.717087] isapnp: Scanning for PnP cards... [ 51.069766] isapnp: No Plug & Play device found [ 51.091550] Real Time Clock Driver v1.12ac [ 51.091736] hpet_resources: 0xfed00000 is busy [ 51.091773] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 51.092959] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 51.093090] input: Macintosh mouse button emulation as /class/input/input0 [ 51.093224] PNP: No PS/2 controller found. Probing ports directly. [ 51.094091] i8042.c: No controller found. [ 51.094224] mice: PS/2 mouse device common for all mice [ 51.094329] EISA: Probing bus 0 at eisa.0 [ 51.094334] Cannot allocate resource for EISA slot 1 [ 51.094336] Cannot allocate resource for EISA slot 2 [ 51.094338] Cannot allocate resource for EISA slot 3 [ 51.094354] EISA: Detected 0 cards. [ 51.094422] TCP cubic registered [ 51.094431] NET: Registered protocol family 1 [ 51.094448] Using IPI No-Shortcut mode [ 51.094638] Magic number: 11:649:856 [ 51.094659] hash matches device ptyv8 [ 51.094663] hash matches device ptysb [ 51.094819] Freeing unused kernel memory: 364k freed [ 52.248580] AppArmor: AppArmor initialized<5>audit(1192920582.276:2): type=1505 info="AppArmor initialized" pid=1341 [ 52.252973] fuse init (API version 7.8) [ 52.256348] Failure registering capabilities with primary security module. [ 52.294188] Monitor-Mwait will be used to enter C-1 state [ 52.563498] usbcore: registered new interface driver usbfs [ 52.563515] usbcore: registered new interface driver hub [ 52.563539] usbcore: registered new device driver usb [ 52.564127] USB Universal Host Controller Interface driver v3.0 [ 52.564179] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 52.564187] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 52.564189] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 52.564307] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 52.564332] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000030a0 [ 52.564418] usb usb1: configuration #1 chosen from 1 choice [ 52.564434] hub 1-0:1.0: USB hub found [ 52.564438] hub 1-0:1.0: 2 ports detected [ 52.577050] SCSI subsystem initialized [ 52.580124] libata version 2.21 loaded. [ 52.586834] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 52.586846] Copyright (c) 1999-2006 Intel Corporation. [ 52.667630] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 52.667639] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 52.667642] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 52.667661] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 52.667686] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003080 [ 52.667765] usb usb2: configuration #1 chosen from 1 choice [ 52.667789] hub 2-0:1.0: USB hub found [ 52.667793] hub 2-0:1.0: 2 ports detected [ 52.771551] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 52.771557] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 52.771560] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 52.771578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 52.771600] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003060 [ 52.771673] usb usb3: configuration #1 chosen from 1 choice [ 52.771698] hub 3-0:1.0: USB hub found [ 52.771702] hub 3-0:1.0: 2 ports detected [ 52.875488] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22 [ 52.875494] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 52.875497] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 52.875514] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 52.875537] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040 [ 52.875619] usb usb4: configuration #1 chosen from 1 choice [ 52.875640] hub 4-0:1.0: USB hub found [ 52.875645] hub 4-0:1.0: 2 ports detected [ 52.979753] ACPI: PCI Interrupt 0000:10:0b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.029686] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 53.030735] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f2e04000-f2e047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 53.034808] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 53.034817] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 53.034916] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 19 (level, low) -> IRQ 19 [ 53.034932] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 53.034935] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 53.034971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 53.034997] ehci_hcd 0000:00:1d.7: debug port 1 [ 53.035003] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 53.035009] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2f04800 [ 53.057897] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:1d:4f:44:b9:10 [ 53.097096] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 53.097113] ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 53.097120] PCI: Setting latency timer of device 0000:05:00.1 to 64 [ 53.121856] e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:1d:4f:44:b9:11 [ 53.143336] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 53.143436] usb usb5: configuration #1 chosen from 1 choice [ 53.143461] hub 5-0:1.0: USB hub found [ 53.143467] hub 5-0:1.0: 8 ports detected [ 53.159180] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 53.247307] ata_piix 0000:00:1f.1: version 2.11 [ 53.247325] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 20 [ 53.247356] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 53.247418] scsi0 : ata_piix [ 53.247469] scsi1 : ata_piix [ 53.247551] ata1: PATA max UDMA/100 cmd 0x000130e8 ctl 0x000130fe bmdma 0x000130c0 irq 20 [ 53.247554] ata2: PATA max UDMA/100 cmd 0x000130e0 ctl 0x000130fa bmdma 0x000130c8 irq 20 [ 53.555061] usb 2-1: device not accepting address 2, error -71 [ 53.567333] ata1.00: ATAPI: PIONEER DVD-RW DVR-112D, AC08, max UDMA/66 [ 53.739244] ata1.00: configured for UDMA/66 [ 53.911857] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D AC08 PQ: 0 ANSI: 5 [ 53.911909] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 53.911925] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 53.911951] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 53.911987] scsi2 : ata_piix [ 53.912030] scsi3 : ata_piix [ 53.912110] ata3: SATA max UDMA/133 cmd 0x000130d8 ctl 0x000130f6 bmdma 0x00013020 irq 21 [ 53.912112] ata4: SATA max UDMA/133 cmd 0x000130d0 ctl 0x000130f2 bmdma 0x00013028 irq 21 [ 53.978841] usb 5-3: new high speed USB device using ehci_hcd and address 2 [ 54.109552] ata3.00: ATA-7: ST3250820AS P, 3.BQE, max UDMA/133 [ 54.109555] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 54.111221] usb 5-3: configuration #1 chosen from 1 choice [ 54.111385] hub 5-3:1.0: USB hub found [ 54.111476] hub 5-3:1.0: 2 ports detected [ 54.176146] ata3.00: configured for UDMA/133 [ 54.303045] ieee1394: Host added: ID:BUS[0-01:1023] GUID[001cb3fffe956f00] [ 54.381746] ata4.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 [ 54.381749] ata4.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 54.448334] ata4.00: configured for UDMA/133 [ 54.448404] scsi 2:0:0:0: Direct-Access ATA ST3250820AS P 3.BQ PQ: 0 ANSI: 5 [ 54.448496] scsi 3:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 [ 54.462565] usb 5-5: new high speed USB device using ehci_hcd and address 3 [ 54.482778] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 54.482781] Uniform CD-ROM driver Revision: 3.20 [ 54.482823] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 54.482911] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 54.482921] sd 2:0:0:0: [sda] Write Protect is off [ 54.482923] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.482935] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.482981] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 54.482997] sd 2:0:0:0: [sda] Write Protect is off [ 54.482999] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.483013] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.483016] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 54.485363] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 54.485376] scsi 3:0:0:0: Attached scsi generic sg2 type 0 [ 54.530421] sda1 sda2 sda3 [ 54.530528] sd 2:0:0:0: [sda] Attached SCSI disk [ 54.530561] sd 3:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) [ 54.530568] sd 3:0:0:0: [sdb] Write Protect is off [ 54.530569] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 54.530578] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.530600] sd 3:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) [ 54.530605] sd 3:0:0:0: [sdb] Write Protect is off [ 54.530606] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 54.530614] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.530616] sdb: sdb1 sdb2 [ 54.571359] sd 3:0:0:0: [sdb] Attached SCSI disk [ 54.598952] usb 5-5: configuration #1 chosen from 1 choice [ 54.599102] hub 5-5:1.0: USB hub found [ 54.599209] hub 5-5:1.0: 2 ports detected [ 54.809943] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 54.809952] ReiserFS: sda3: using ordered data mode [ 54.817279] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 54.817510] ReiserFS: sda3: checking transaction log (sda3) [ 54.840008] ReiserFS: sda3: Using r5 hash to sort names [ 54.910415] usb 5-3.1: new high speed USB device using ehci_hcd and address 4 [ 55.002688] usb 5-3.1: configuration #1 chosen from 1 choice [ 55.002778] hub 5-3.1:1.0: USB hub found [ 55.002860] hub 5-3.1:1.0: 4 ports detected [ 55.306196] usb 5-5.1: new high speed USB device using ehci_hcd and address 5 [ 55.398504] usb 5-5.1: configuration #1 chosen from 1 choice [ 55.398678] hub 5-5.1:1.0: USB hub found [ 55.398768] hub 5-5.1:1.0: 4 ports detected [ 55.705971] usb 5-5.2: new low speed USB device using ehci_hcd and address 6 [ 55.803731] usb 5-5.2: configuration #1 chosen from 1 choice [ 56.005807] usb 5-3.1.1: new high speed USB device using ehci_hcd and address 7 [ 56.184666] usb 5-3.1.1: configuration #1 chosen from 1 choice [ 56.381604] usb 5-3.1.2: new full speed USB device using ehci_hcd and address 8 [ 56.491982] usb 5-3.1.2: configuration #1 chosen from 2 choices [ 56.689433] usb 5-5.1.1: new high speed USB device using ehci_hcd and address 9 [ 56.868281] usb 5-5.1.1: configuration #1 chosen from 1 choice [ 57.065350] usb 5-5.1.2: new low speed USB device using ehci_hcd and address 10 [ 57.193855] usb 5-5.1.2: configuration #1 chosen from 1 choice [ 57.393168] usb 5-5.1.3: new full speed USB device using ehci_hcd and address 11 [ 57.491936] usb 5-5.1.3: configuration #1 chosen from 1 choice [ 59.580614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 59.600473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 59.637348] intel_rng: FWH not detected [ 59.693007] Linux agpgart interface v0.102 (c) Dave Jones [ 59.766905] usbcore: registered new interface driver usbserial [ 59.766927] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 59.766963] usbcore: registered new interface driver usbserial_generic [ 59.766965] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 59.774022] usbcore: registered new interface driver libusual [ 59.788556] usbcore: registered new interface driver hiddev [ 59.791075] input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input1 [ 59.791127] input: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.7-5.2 [ 59.798298] input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input2 [ 59.798351] input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.7-5.1.2 [ 59.806426] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device [ 59.808933] input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input3 [ 59.808963] input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.7-5.1.2 [ 59.808977] usbcore: registered new interface driver usbhid [ 59.808980] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 59.808985] ftdi_sio 5-5.1.3:1.0: FTDI USB Serial Device converter detected [ 59.809029] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT232BM [ 59.809153] usb 5-5.1.3: FTDI USB Serial Device converter now attached to ttyUSB0 [ 59.809161] usbcore: registered new interface driver ftdi_sio [ 59.809163] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver [ 59.817014] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 59.817017] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 59.831661] nvidia: module license 'NVIDIA' taints kernel. [ 60.081719] Initializing USB Mass Storage driver... [ 60.081761] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 60.081780] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 60.081801] scsi4 : SCSI emulation for USB Mass Storage devices [ 60.081892] usb-storage: device found at 7 [ 60.081893] usb-storage: waiting for device to settle before scanning [ 60.081926] scsi5 : SCSI emulation for USB Mass Storage devices [ 60.081965] usb-storage: device found at 9 [ 60.081966] usb-storage: waiting for device to settle before scanning [ 60.081972] usbcore: registered new interface driver usb-storage [ 60.081974] USB Mass Storage support registered. [ 60.082534] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 60.094219] usbcore: registered new interface driver xpad [ 60.094223] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 60.319250] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 60.319265] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 60.794624] lp: driver loaded but no devices found [ 65.082454] usb-storage: device scan complete [ 65.082556] usb-storage: device scan complete [ 65.086698] scsi 5:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 65.086732] scsi 4:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 65.089814] scsi 5:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 65.090083] scsi 4:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 65.094203] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 65.094237] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 65.143060] sd 5:0:0:1: [sdd] Attached SCSI removable disk [ 65.143097] sd 5:0:0:1: Attached scsi generic sg4 type 0 [ 65.147051] sd 4:0:0:0: [sde] Attached SCSI removable disk [ 65.147081] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 65.196804] sd 4:0:0:1: [sdf] Attached SCSI removable disk [ 65.196846] sd 4:0:0:1: Attached scsi generic sg6 type 0 [ 72.829632] No dock devices found. [ 72.871709] input: Power Button (FF) as /class/input/input4 [ 72.871724] ACPI: Power Button (FF) [PWRF] [ 72.871810] input: Power Button (CM) as /class/input/input5 [ 72.871821] ACPI: Power Button (CM) [PWRB] [ 73.806473] NET: Registered protocol family 10 [ 73.806593] lo: Disabled Privacy Extensions [ 73.907456] ppdev: user-space parallel port driver [ 73.977832] audit(1192920604.044:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=6017 profile="/usr/sbin/cupsd" [ 74.069628] apm: BIOS not found. [ 74.102257] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.108998] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 74.110340] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 74.172052] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 74.173090] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 74.173095] e1000: eth1: e1000_watchdog: 10/100 speed: disabling TSO [ 74.174443] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 74.228084] Failure registering capabilities with primary security module. [ 74.355552] Bluetooth: Core ver 2.11 [ 74.355596] NET: Registered protocol family 31 [ 74.355597] Bluetooth: HCI device and connection manager initialized [ 74.355599] Bluetooth: HCI socket layer initialized [ 74.374309] Bluetooth: L2CAP ver 2.8 [ 74.374313] Bluetooth: L2CAP socket layer initialized [ 74.407587] Bluetooth: RFCOMM socket layer initialized [ 74.407610] Bluetooth: RFCOMM TTY layer initialized [ 74.407613] Bluetooth: RFCOMM ver 1.8 [ 78.942154] NET: Registered protocol family 17 [ 122.206596] eth0: no IPv6 routers present [ 156.731485] hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 179.597503] hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 415.830116] eth0: no IPv6 routers present